Steps On How To Make Homemade Essential Oils

By Lelia Hall


Important liquids can be provided by floras of different types. In ancient times, these liquids are used by people for medicinal, culinary, and therapeutic purposes. Several methods are usually employed so that the liquids from the floras can be extracted.

Distillation is commonly used. Since commercial oils are quite expensive for most people, the distillation method can be employed so that these can be obtained from their own houses. These following procedures could aid them on how to make homemade essential oils.

The individual, as a start, needs an apparatus which he will be using for this distillation process. The apparatus consists of four parts, namely the separator, condenser, holding tank or a retort, heat source or a furnace. Each component serves a specific function. The person could be purchasing an apparatus from a hardware store though it might be expensive for him. However, if he will only be producing a little amount of liquid, he could be building his own improvised apparatus, instead.

He should be getting the raw material where he will be extracting the liquid from. It can be a plant, herb, flower, or any other flora. He could be obtaining the plant from his own garden but he must be properly handling it. He could also be purchasing a plant from the market but he should be buying one still in its whole form. Prior to obtaining the material, he must be conducting a research first about the plant type which could be providing him with enough liquid.

These materials should be dried by the enthusiasts so that their yields can be increased. However, the materials should not be placed under the sunlight directly. The drying methods for various plants might vary. Ideally, these should be dried under shades or inside completely dark rooms. The plants must not get wet after they are dried before the distillation starts.

While they wait for the drying methods to complete, they should fill the tanks with enough clean water, preferably distilled or filtered water. If they have commercial stills, they should follow the instructions for use from the manufacturers. Afterwards, they should completely submerge the materials into the tanks. They do not have to cut these plants so that they can preserve some more liquids.

After the plants are put inside, the lids of these tanks should be properly closed and the persons should wait until they boil. The procedures might take about one to six hours, that will depend on the plant types utilized and amounts of water in the tanks. Essential liquids are released by most floras after they have boiled.

Once the processes have been completed, the liquids should be filtered. Cheesecloth or other fabric types should be used. They need to ensure, though, the dryness and cleanliness of these fabrics. This way, the oils will not be contaminated by residues and dirt.

The person needs to be storing the liquid inside a glass container through a funnel. He could also be using a stainless steel container. He has to see to it that the container is clean prior to doing so. He must be storing the item in a cool and also dark place for it to be lasting for two years.




About the Author:



Comments

Popular posts from this blog

Tips On How To Deal With A Slow Connection

A Helpful Article About Home Business That Offers Many Useful Tips

Reasons For Reinstating A Company